Bunded Plastic Diesel Storage and Dispensing Tank, rotationally moulded from a premium grade of fuel resistant, Medium Density Polyethylene

• 240v Electric Pump with 60lpm Nominal Flow Rate
• 2” BSP Lockable Fill Point with Screw Cap and Chain
• 4” Lockable Inspection Point with Plastic Screw Cap
• LRC Failsafe Overfill Prevention Capability
• Tank Vent
• Fuel Tank Contents Dipstick
• Lockable Access
• 4 metre Diesel resistant Delivery Hose with Three Stage Automatic Shut Off Nozzle

Bunded Tank

Suitable for the storage and dispensing of Diesel and BioDiesel grades up to B5, produced in accordance with the requirements of BS/IS EN14214 at agricultural, commercial, industrial and institutional premises. Fully bunded, this tank satisfies or exceeds all applicable product requirements detailed within:

• The Control of Pollution (Oil Storage) (England) Regulations 2001
• The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations 1991
• The Control of Pollution (Silage, Slurry and Agricultural Fuel Oil) Regulations (Northern Ireland) 2003
• The Water Environment (Oil Storage) (Scotland) Regulations 2006
• Environmental Alliance Pollution Prevention Guidelines PPG 2

Length: 2950 mm
Width: 2500 mm
Height: 2520 mm
Weight: 420 kg
Actual Capacity: 5307 litres
Nominal Capacity: 5042 litres

Additional Standard features on this model include:

• Offset 2” Fill Point with loackable screw cap, lever type Isolation valve and non return valve
• Bund Warning Alarm
• Emergency Isolation Switch
• Electronic Oil Tank Contents Gauge

Installation Requirements

This Bunded Tank must be installed and maintained by a suitably competent person in accordance with supplied instructions and prevailing statutory requirements.

All mains electrical connections to this bunded tank, must be made only by an independently accredited electrician in accordance with prevailing electrical safety requirements and to an RCD protected power supply.